- HOME
- 3D PRINTERS
- POLIMERS
- FDM
- Stratasys FDM F770
Stratasys FDM F770
Industrial scale printing. Simplified.
The Stratasys F770™ makes printing large, complex parts accessible, affordable and easy. Get the accurate print results, reliability and repeatability that FDM Technology™ is known for while printing parts up to a meter long in a precision controlled, heated build chamber.
Soluble Support material allows you to print the parts you want, not the parts you’re limited to by other methods. Complex geometries without the constraints or limitations of printers with inferior support capability.
Descarcă broşura
Request an offer
User-friendly GrabCAD Print™ software makes the CAD-to-print workflow simple. For those who want more in-depth print adjustment capability, Insight™ software is also included. 3D printing with the F770 is a lights-out, 24/7 operation. There’s no need to constantly monitor the printer while printing and quick-change material canisters are equipped with 200ci of filament, allowing for up to 140 hours of unattended print time. When you want to check progress, the F770’s build in camera provides continually updated print status that you can monitor from your mobile device.
To learn more about the Stratasys F770 printer or to speak with a representative, contact us.
F770 Printer and Material Specifications |
||
System Size and Weight |
175 x 124 x 196 cm (69 x 49 x 77 in.) 658 kg (1450 lbs.) |
|
Build Envelope |
1000 x 610 x 610 mm / 372,000 cm3 (39.4 x 24 x 24 in. / 22,677 in3) Maximum length on the diagonal – 1,171 cm (46.1 in.) |
|
Materials |
ASA – Ivory ABS-M30™ – Black SR-30™ soluble support material |
|
Material Delivery |
200 in3 coil box (3277 cm3) |
|
Achievable Accuracy |
XY part accuracy = +/- 0.254 mm (+/- 0.010 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.), whichever is greater Z part accuracy = +/- 0.200 mm (+/- 0.008 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.), plus 1 layer height |
|
Software |
GrabCAD Print, Insight, Control Center™, MTConnect enabled |
|
Workstation Compatibility |
Wired and wireless (with USB dongle) network interfaces using standard TCP/IP protocols at 100 MBPS minimum |
|
Wireless Network Connectivity |
IEEE 802.11n-2009 IEEE 802.11g-2003 IEEE 802.11b-1999 |
|
Operating Conditions |
Operating temperature 15 °C to 30 °C (59 °F to 86 °F) Operating Humidity 30-70% - 39 in. clearance on each side of printer |
|
Audible Noise/Acoustics |
54 dBA |
|
Power Requirements |
3 phase, 208V, 30A, 5 wire, 47-63 Hz frequency |
|
Regulatory Compliance |
CE, cTUVus, RCM, EAC, FCC Part B |
|
Facility Requirements |
Double-door width for installation, vacuum pump within system – no shop air required, forklift uncrating and installation |
|
Installation Requirements |
Crate = 186.7 cm W x 146 cm D x 225.4 cm H (73.5 in. W x 57.5 in. D x 88.75 in. H) Crated weight = 907 kg (2000 lbs) |
Feedback
Customer Feedback Form
Register for Our Newsletter